To Next PageTo Next Page
Need help?Do you have a question about the Donaldson Torit Unimaster UMA 250 and is the answer not in the manual?
General| Brand | Donaldson Torit |
|---|---|
| Model | Unimaster UMA 250 |
| Category | Dust Collector |
| Language | English |
Details the Unimaster dust collector models covered in the manual.
Highlights risks from combustible materials and the need for special care.
Advises consulting codes and fire system installers for safety.
Warns against sparks, cigarettes, and burning objects.
Introduces the self-contained, intermittent-duty dust collectors.
Details UMA-B, UMA-H, and UMA-D models and their features.
Explains use for separating solid particulate from airstreams in manufacturing.
Lists common processes like blending, drilling, and polishing.
Describes how dust-laden air enters and is filtered.
Explains the automatic cleaning sequence after fan shutdown.
Guidance on choosing appropriate locations and foundations.
Emphasizes consulting authorities and qualified agents for compliance.
Covers compliance with codes, voltage, and connections.
Details safe practices for lifting and handling the unit.
Notes that units are partially assembled, with final steps on-site.
Steps for preparing the foundation and installing anchor bolts.
Instructions for applying sealant and aligning the mounting flange.
Steps for installing larger or two-piece models and inlet assembly.
Procedures for installing the specified inlet and ensuring proper seal.
Guidelines for mounting the controller and making electrical connections.
Instructions for initiating and terminating unit operation.
Details the process for activating and completing the filter cleaning cycle.
Information on standard explosion vents for outdoor use and safety.
Steps for installing the differential pressure gauge and its taps.
Notes that models UMA 40-250 require lifting into the caster frame.
Procedure for connecting the grounding lug for antistatic filter bags.
Pre-Operation Inspection Checklist.
Safe Unit Shutdown.
Lists daily, weekly, and monthly checks for performance and maintenance.
Step-by-step guide to safely removing filter inserts and assemblies.
Detailed steps for inserting and securing new filter bags and inserts.
Diagnoses and remedies for a non-working blower fan.
Addresses partial or total loss of suction due to filters or ductwork.
Troubleshooting for dust escaping from the clean-air outlet.
Details the warranty period, exclusions, and conditions for the equipment.
Provides contact information for obtaining genuine replacement filters and parts.
