EasyManua.ls Logo

Donaldson Torit Unimaster UMA 450 User Manual

Donaldson Torit Unimaster UMA 450
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation
and Operation Manual
IOM AD3547701
Revision 1
Unimaster
®
Dust Collector
Models UMA 40, 70, 100, 150, and 250
built after August 2005
Models UMA 450 and 750
built after March 2006
Throughout this manual
statements indicating
precautions necessary
to avoid equipment failure are
referenced in a Note. Statements
indicating potential hazards that
could result in personal injury or
property damage are referenced
in a Caution! box.
Installation,
Operation, and
Service Information
This manual is property of the owner. Leave with the unit when set-up and
start-up are complete. Donaldson Company reserves the right to change design
and specifications without prior notice.
UMA-H 250
Hopper Base
UMA-B 250
Bin Base
UMA-D 250
55-Gallon Drum Base
Question and Answer IconNeed help?

Do you have a question about the Donaldson Torit Unimaster UMA 450 and is the answer not in the manual?

Donaldson Torit Unimaster UMA 450 Specifications

General IconGeneral
BrandDonaldson Torit
ModelUnimaster UMA 450
CategoryDust Collector
LanguageEnglish

Summary

Purpose and Intended Use

Equipment Use Safety

Caution against misuse or modification; may result in personal injury.

Unit Operation

Filter Cleaning Cycle

Starts after fan shutdown; vibration motor cleans filters for 30 seconds.

Installation Guide

Installation Codes and Procedures

Consult authorities, follow NEC/NFPA 70, use qualified agent, remove shipping materials.

Site Selection and Unit Location

Consider use, wind, seismic loads, heat, utilities, dust source proximity, and maintenance access.

Support for External Components

Caution: Donaldson equipment does not support site-installed ducts or services; ensure adequate support.

Electrical Wiring

Electrical Installation Safety

Must be done by qualified electrician, comply with codes, and power must be locked out.

Electrical Connections

UMA Controller Operations

Optional Equipment

Explosion Vent Safety and Application

Direct outdoors away from people/property; use NFPA-68 for calculations; suitable for negative pressure.

Start-Up and Operation

Preliminary Start-Up Checks

Check connections, loose items, controls, accessories, and fan rotation before starting.

Service Information and Safety

Lock out power before service. Follow operational checklists for monitoring and maintenance.

Filter Maintenance

Filter Removal Procedures

Lock out power, open door, lower handles, slide assembly out, remove filter inserts safely.

Filter Replacement Procedures

Insert bag into frame, place edging, insert filters, slide assembly, secure pockets, replace door.

Troubleshooting Guide

Related product manuals