Dongcheng DCJZ03-13 - Page 6

6
EN
used with another battery.
b)
Use power tools only with
specically designated
batteries. Use of any other
batteries may create a risk of
injury and re.
c)
When battery pack is not in
use, keep it away from other
metal objects,like paper clips,
coins, keys, nails, screws,
or other small metal objects,
that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause sparks,
burns, or a re.
d)
Under abusive conditions,
liquid may be ejected from
the battery; avoid contact. If
contact accidentally occurs,
ush with water. If liquid
contacts eyes, additionally
seek medical help. Liquid
ejected from the battery may
cause irritation or burns.
e)
Do not use a battery pack
or tool that is damaged
or modied. Damaged or
modied batteries may exhibit
unpredictable behaviour
resulting in re, explosion or risk
of injury.
f)
Do not expose a battery pack
or tool to re or excessive
temperature. Exposure to re
or temperature above 130 °C
may cause explosion.
NOTE The temperature „130
°C“ can be replaced by the
temperature „265 °F“.
g
) Follow all charging
instructions and do
not charge the battery
pack or tool outside the
temperature range specied
in the instructions. Charging
improperly or at temperatures
outside the specied range
may damage the battery and
increase the risk of re.
6)
Service
a)
Have your power tool
serviced by a qualied repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
b)
Never service damaged
battery packs. Service of
battery packs should only be
performed by the manufacturer
or authorized service providers..
Drill safety warnings
1)
Safety instructions for all
operations
a)
Wear ear protectors when
impact drilling. Exposure to
noise can cause hearing loss.