Need help?Do you have a question about the Dongcheng DZC05-26B and is the answer not in the manual?
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not force the power tool. Use the correct power tool for your application.
Have your power tool serviced by a qualified repair person using only identical replacement parts.
Wear ear protectors. Exposure to noise can cause hearing loss.
Provides specifications like rated voltage, frequency, current, and weight of the machine.
Details the suitable applications for the product, such as drilling, grooving, and chiseling.
Guidance on setting up or fixing power tools in a stable position before operation.
Explains common symbols used in the manual, like warnings and protective equipment.
Always ensure the tool is switched OFF before changing the operating mode to avoid damage.
Select the correct mode for impact drilling on concrete or stone, or normal drilling.
How to install SDS-plus hammer drill bits for various materials like steel, wood, or plastic.
Instructions for installing and removing SDS-plus drill bits, ensuring the tool is switched off.
Use the auxiliary handle to ensure operating safety by loosening and tightening it correctly.
Set the depth gauge for drilling uniform holes by loosening the auxiliary handle and securing it.
Check trigger switch function. Pull trigger to start, release to stop.
Inspect drill bits for bluntness and exchange or sharpen them to maintain efficiency.
Regularly inspect all mounting screws and tighten them immediately if loose to prevent hazards.
Exercise care to ensure the motor winding does not become damaged or wet with oil or water.
Inspect carbon brushes regularly and replace when worn down to the limit mark.
Replace the dust cap if damaged to prevent chippings from entering the collet.
To Next Page
General