Need help?Do you have a question about the Dongcheng DSA125 and is the answer not in the manual?
Keep work area clean, well-lit, and free from children/bystanders to prevent accidents.
Ensure correct plugs, avoid wet conditions, protect cords, and use RCDs in damp locations.
Stay alert, use PPE, prevent unintentional starting, remove tools, and maintain balance for safe operation.
Use correct tool, check switch, disconnect before adjustments, store safely, maintain accessories.
Keep tools sharp, clean surfaces, and handle tools properly for safe operation.
Ensure qualified servicing with identical parts to maintain tool safety.
Verify voltage compatibility to prevent serious injury and machine damage.
Follow specific safety guidelines for sanding, including accessory use, speed, and protective equipment.
Maintain proper posture, avoid rotating parts, work carefully on edges, and use appropriate accessories.
Understand symbols on the rating plate for important product information and usage instructions.
The machine is designed for dry sanding of wood, plastic, filler, and coated surfaces.
Details on switch operation, speed control, and abrasive paper installation for proper tool usage.
Instructions for checking mounting screws, motor, air vents, and carbon brushes for tool longevity.
Information on parts that can be replaced and necessary procedures, like brush replacement.
General| Sanding Pad Size | 125 mm |
|---|---|
| Orbit diameter | 2.5 mm |
| Sandpaper size | 125 mm |
| Rated Speed | 12000 rpm |
| No-load speed | 12000 rpm |
To Next Page
