PREPARE BEFORE USE
This chapter will introduce the function jacks related to the electronic piano and give out some information before playing. Before opening
the power switch of the electronic piano, please read the following items.
POWER CONNECTION
1. Confirm whether the power switch is turned off, if it is not, please turn off the power switch.
2. Connect the power cord, firstly insert the plug into the DC jack on the back of the electronic piano then plug the other end of the
power adapte into the power outlet
3. Before opening the power, adjust all volume controllers to the minimum.
4. When turning off the power of the electronic piano, first tune all volume controllers to the minimum then turn off the powe switch.
ON
Warning
OFF
• Minimum •Maximum
Master Volume
DC IN
• Minimum •Maximum
Rhythm Volume
When you don't use the electronic piano,or when it thunders, please remove the power plug
Please ensure that the power supply voltage is 220V ± 10% AC, too high or too low voltage will cause damage to the electronic
piano. And the power socket should be a triangle, it should be grounded
Do not remove the power cord from the power socket when the electronic piano is still opened.
SOCKET ON THE BACK OF THE HOST
8? oo
AUDIO PORT MIDI INTERFACE USB INTERFACE POWER INTERFACE
To Next Page
Loading...
