11
7. Next remove the faceplate and auger from the machine and clean.
8. Wipe down the inside of the hoppers and freezing cylinders with a soft
cloth or sponge.
9. Once all parts have been cleaned, be sure to add Food Grade Lubricant
to all of the rubber gaskets and seals; then reassemble the machine for
future use.
Cleaning Condenser
After
being used for a period of
time,
a thick layer of dust
will
begin to
collect on the condenser and
will
begin to effect radiate heat and cause
refrigeration
difference. To ensure this does not happen we recommend
cleaning
the condenser
periodically.
(4-6 months)
1. Disconnect from the main power supply.
2. Remove the back and side panels.
3. Remove dust with proper tools such as vacuum cleaner, high pressure
air, etc.
Be
careful
not
t
o
damage
the
fins
on
the
condenser
when
cleaning.
To Next Page
Loading...
