Need help?Do you have a question about the DONPER D250 and is the answer not in the manual?
Steps to unpack, inspect, and place the machine in the preparation area according to requirements.
Instructions for disassembling, cleaning, lubricating, and sanitizing machine parts before operation.
Steps for preparing product, adding it to hoppers, and starting the freezing process for desired consistency.
Detailed steps for safely removing the machine from its shipping packaging and pallet.
Instructions for removing and organizing all packaged parts and accessories from the machine.
Daily cleaning/sanitizing and periodic replacement of wearable parts for optimal performance and reliability.
Procedure for preparing, adding, and freezing product in the machine's cylinders for desired consistency.
Instructions for entering and exiting standby mode to conserve energy and reduce product loss.
Explains how freezing cylinders and hoppers operate when the machine is in STANDBY MODE.
Guide to adjusting the product consistency from softer (01) to harder (10) using control panel buttons.
Procedure for viewing the total number of cups dispensed by the machine.
Steps to reset the cup counter value back to zero using the control panel.
Instructions for placing the machine into WASH mode to agitate contents without freezing.
How to exit the WASH mode and return the machine to its normal operating state.
Guide to accessing and navigating the advanced settings menu on the control panel.
General| Model | D250 |
|---|---|
| Category | Ice Cream Maker |
| Refrigerant | R404A |
| Power | 1800W |
| Power Consumption | 1800W |
| Voltage | 220V/50Hz |
| Power Supply | 220V/50Hz |
To Next Page
