dooch N747D - Page 17

BOOSTER PUMP SYSTEM 17
BOOSTER PUMP SYSTEM N747D
6. After setting, press “save”.
Changeable items in user setting [2] are as below.
- Time setting : 2008/11/13 12:20 Thursday
It displays in the order of year/month/day time :minute days, and if it does not
matched with present time then adjust it.
Adjust of time settings
( Example: In case of change “2008/11/13 12:00 Thursday” to “2008/11/13 24:00
Thursday”)
1. Using
Key, select .
2. The first ‘2’ of the ‘2008/11/13 12:00 Thursday’ blinks.
3. Using
Key, enter in the order of 2,0,0,8,1,1,1,3,1,2,0 and 0 (Thurs).
When no change is required or in case of wrong input, it’s available to move to
required position using
Key.
The last number means day of the week as below;
1 : Mon 2 : Tue 3 : Wed 4 : Thurs 5 : Fri 6 : Sat 7 : Sun
4. After changing to required value, make sure to press
Key.
※ Set value is not changed until input key is pressed.
- Setting high pressure alarm : ＯＯ.ＯＯkgf/cm² ＯＯＯsecond
When water pressure sustains at above than specified pressure (ＯＯ.ＯＯ) for more
than ＯＯＯ seconds, alarm is to be given.
Change settings of high pressure alarm
(Example: in case of to change 05.00 kgf/cm² 005 seconds to 04.00 kgf/cm²
003seconds)
1. Using
Key, select .
2. Initially the first ‘0’ of the ’05.00 kgf/cm² 005 second’ blinks.
3. Using
Key, enter in the order of 0, 4, 0, 0, 0, 0 and 3.
In case no change is required or wrong input, moving to desired position is available
by using
Key.
4. After changing to required value, make sure to press
Key.