BOOSTER PUMP SYSTEM 35
BOOSTER PUMP SYSTEM N747D
- Setting of installer’s password : Changing installer’s password.
Change of installer’s password
(Example: To change “Installer’s password : 0000" to “User’s password:1234”)
1. Using
Key, select .
2. User’s password : Initially the first ‘0’ of the ’000’ blinks.
3. Enter by using
Key.
4. After changing to required value, make sure to press
Key.
※ Set value is not changed until input key is pressed.
- System initializing : Initialize setting values to ex-factory value.
Change setting of system initialization.
(Example: In case to change “No” to “Yes”.)
1. Using
Key, select .
2. Enter by using
Key.
: No : Ye s
3. After changing to required value, make sure to press
Key.
※ Set value is not changed until input key is pressed.
To Next Page
Loading...
