dooch N747D - Page 40

40 BOOSTER PUMP SYSTEM
BOOSTER PUMP SYSTEM N747D
- CAN : Select whether to use CAN communication or not.
Change CAN setting CAN .
(Example: To change “No use” to “Use” )
1. Using
Key, select. CAN : NOT USED
2. Enter using
Key.
: No use, : Use
3. After changing to required value, make sure to press
Key.
※ Set value is not changed until input key is pressed.
- BAUD RATE : Select communication speed.
( 0 : 40kbps 1 : 50kbps 2 : 100kbps 3 : 200kbps 4: 250kbps )
Change setting of BAUD RATE.
(Example: In case of to change 40kbps to 50kbps)
1. Using
Key, select .
2. Enter
among Keys.
: 40kbps, : 50kbps, : 100kbps, : 200kbps, : 250kbps
3. After changing to required value, make sure to press
Key.
※ Set value is not changed until input key is pressed.