[
[CHAPTER 1 BASIC MATTERS]
1-2 |
DOOCHPUMP
ㆍ Product model name is indicated as above. Initial four digits indicate driving
capacity of the drive in 00.00kW unit. Decimal point is not indicated.
ㆍ 'T' refers Three phase.
ㆍ ‘D’ means CAN Driver indicating Multi-Drive control system. If it is a single type, D will
be omitted.
1.3 Installation
Install the drive with proper method under specified conditions considering its
life and performance.
1.4 Wiring
Connect power supply and motor to the power supply terminal block and operation and
control signal to the control terminal block. Since improper connection will cause
malfunction or damage, be sure to wire with specified method.
To Next Page
Loading...
