3 |
DOOCHPUMP
Cautions for Use
A. Transportation and Installation
ㆍ Transport the product with correct method according to its weight.
ㆍ Do not stack the products with more than specified layers.
ㆍ Install the product upon rules described on the User’s Manual.
ㆍ Do not open during transportation of the product.
ㆍ Do not put any heavy object on the product.
ㆍ Installation direction shall follow criteria specified on the User’s Manual.
ㆍ Do not fall or give strong impact on the drive as it is a precise instrument.
ㆍ Draw water completely out of the pump during winter without using for a long time.
ㆍ Use the drive under the environmental conditions as mentioned below.
Installation Location
Keep out of corrosive gasses, inflammable gasses,
Liquid and dust.
Temperature/Humidity
-10 ~ 40℃ / Not more than 90% RH (No dewdrop)
Storage Temperature
-20 ~ 65℃
Elevation
Vibration
Altitude 1,000m or lower
below 5.9m/sec² (=0.6g)
Ambient Atmospheric Pressure
70 ~ 106 kpa
B. Wiring
ㆍ After installing the main body, execute wiring.
ㆍ Wiring or inspection shall be performed by the professional technicians.
To Next Page
Loading...
