[CHAPTER 8 Appendix]
8-2 |
DOOCHPUMP
Fault Diagnosis - in case communication is not connected
Check point Note
Connection between master of
computer or FA equipment and NQ drive
RS485 Pr-40 485 comm. Mode
RS485 comm. speed Pr-42 485 comm. Speed
RS485 comm. ID Pr-41 485 comm. ID
CAN commm. ID
Pr-51 CAN comm. ID(must be set, as 485 is communication
with master of pump system)
Starting communication of master of computer
or FA equipments
Data format of user's programm
To Next Page
Loading...
