Doogee S88 - Page 28

- Page 28 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
G.10.3 Test for resistors serving as safeguards between
the mains and an external circuit consisting of a
coaxial cable
N/A
G.10.3.1 General requirements N/A
G.10.3.2 Voltage surge test N/A
G.10.3.3 Impulse test N/A
G.11 Capacitor and RC units
N/A
G.11.1 General requirements No such components used N/A
G.11.2 Conditioning of capacitors and RC units N/A
G.11.3 Rules for selecting capacitors N/A
G.12 Optocouplers
N/A
Optocouplers comply with IEC 60747-5-5:2007
Spacing or Electric Strength Test (specify option
and test results) ................................................... :
N/A
Type test voltage Vini ......................................... :

Routine test voltage, Vini,b ................................ :

G.13 Printed boards
P
G.13.1 General requirements P
G.13.2 Uncoated printed boards P
G.13.3 Coated printed boards N/A
G.13.4 Insulation between conductors on the same inner
surface
N/A
Compliance with cemented joint requirements
(Specify construction) .......................................... :

G.13.5 Insulation between conductors on different
surfaces
N/A
Distance through insulation .................................. : N/A
Number of insulation layers (pcs) ....................... :

G.13.6 Tests on coated printed boards N/A
G.13.6.1 Sample preparation and preliminary inspection N/A
G.13.6.2a) Thermal conditioning N/A
G.13.6.2b) Electric strength test N/A
G.13.6.2c) Abrasion resistance test N/A
G.14 Coating on components terminals
N/A
G.14.1 Requirements .....................................................: N/A
G.15 Liquid filled components
N/A
G.15.1 General requirements N/A