Doogee S88 - P SAFEGUARDS AGAINST ENTRY OF FOREIGN OBJECTS AND SPILLAGE OF INTERNAL LIQUIDS; P.1 General requirements; P.2.2 Safeguards against entry of foreign object

- Page 32 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
M.6.1 Short circuits P
M.6.1.1 General requirements P
M.6.1.2 Test method to simulate an internal fault P
M.6.1.3 Compliance (Specify M.6.1.2 or alternative
method) .............................................................. :
N/A
M.6.2 Leakage current (mA) ........................................ : N/A
M.7 Risk of explosion from lead acid and NiCd
batteries
N/A
M.7.1 Ventilation preventing explosive gas
concentration
N/A
M.7.2 Compliance and test method N/A
M.8 Protection against internal ignition from external
spark sources of lead acid batteries
N/A
M.8.1 General requirements N/A
M.8.2 Test method N/A
M.8.2.1 General requirements N/A
M.8.2.2 Estimation of hypothetical volume Vz (m
3
/s) ....... :

M.8.2.3 Correction factors ................................................ :

M.8.2.4 Calculation of distance d (mm) .......................... :

M.9 Preventing electrolyte spillage N/A
M.9.1 Protection from electrolyte spillage N/A
M.9.2 Tray for preventing electrolyte spillage N/A
M.10 Instructions to prevent reasonably foreseeable
misuse (Determination of compliance: inspection,
data review; or abnormal testing) ....................... :
Provided the instructions include
battery charging, storage and
transportation, and disposal and
recycling.
P
N ELECTROCHEMICAL POTENTIALS N/A
Metal(s) used ...................................................... :

O MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES N/A
Figures O.1 to O.20 of this Annex applied .......... : Considered

P SAFEGUARDS AGAINST ENTRY OF FOREIGN OBJECTS AND SPILLAGE OF
INTERNAL LIQUIDS
P
P.1 General requirements No opening P
P.2.2 Safeguards against entry of foreign object No safeguards requirement. N/A