Doogee S88Pro - Electrically-Caused Injury; Electrical Energy Source Classifications; Protection Against Electrical Energy Sources; Insulation Materials and Requirements

- Page 10 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
5 ELECTRICALLY-CAUSED INJURY P
5.2.1 Electrical energy source classifications ............... : (See appended table 5.2) P
5.2.2 ES1, ES2 and ES3 limits P
5.2.2.2 Steady-state voltage and current......................... : (See appended table 5.2) P
5.2.2.3 Capacitance limits ................................................ : N/A
5.2.2.4 Single pulse limits ................................................ : No single pulse introduced N/A
5.2.2.5 Limits for repetitive pulses ................................... : No repetitive pulses introduced N/A
5.2.2.6 Ringing signals .................................................... : No means for connection to
telephone network and no ringing
signal generated
N/A
5.2.2.7 Audio signals ....................................................... : N/A
5.3 Protection against electrical energy sources All internal circuits considered ES1 N/A
5.3.1 General Requirements for accessible parts to
ordinary, instructed and skilled persons
N/A
5.3.2.1 Accessibility to electrical energy sources and
safeguards
N/A
5.3.2.2 Contact requirements N/A
a) Test with test probe from Annex V .................. : N/A
b) Electric strength test potential (V) ................... : N/A
c) Air gap (mm) ................................................... : N/A
5.3.2.4 Terminals for connecting stripped wire N/A
5.4 Insulation materials and requirements P
5.4.1.2 Properties of insulating material P
5.4.1.3 Humidity conditioning ........................................ : N/A
5.4.1.4 Maximum operating temperature for insulating
materials .............................................................. :
P
5.4.1.5 Pollution degree ................................................... :

5.4.1.5.2 Test for pollution degree 1 environment and for an
insulating compound
N/A
5.4.1.5.3 Thermal cycling N/A
5.4.1.6 Insulation in transformers with varying dimensions N/A
5.4.1.7 Insulation in circuits generating starting pulses N/A
5.4.1.8 Determination of working voltage N/A
5.4.1.9 Insulating surfaces N/A
5.4.1.10 Thermoplastic parts on which conductive metallic
parts are directly mounted
N/A
5.4.1.10.2 Vicat softening temperature ................................. : N/A