Doogee S88Pro - Page 11

- Page 11 of 60 -
Report No. STS200421001001E
IEC/EN 62368-1
Clause Requirement + Test Result - Remark Verdict
Shenzhen NTEK Testing Technology Co., Ltd
5.4.1.10.3 Ball pressure ....................................................... : N/A
5.4.2 Clearances N/A
5.4.2.2 Determining clearance using peak working voltage N/A
5.4.2.3 Determining clearance using required withstand
voltage ................................................................. :
N/A
a) a.c. mains transient voltage ............................. :

b) d.c. mains transient voltage ............................ :

c) external circuit transient voltage ...................... :

d) transient voltage determined by measurement:

5.4.2.4 Determining the adequacy of a clearance using an
electric strength test
N/A
5.4.2.5 Multiplication factors for clearances and test
voltages ................................................................ :
N/A
5.4.3 Creepage distances ............................................. : N/A
5.4.3.1 General N/A
5.4.3.3 Material Group .................................................... :

5.4.4 Solid insulation N/A
5.4.4.2 Minimum distance through insulation ................. : N/A
5.4.4.3 Insulation compound forming solid insulation N/A
5.4.4.4 Solid insulation in semiconductor devices N/A
5.4.4.5 Cemented joints N/A
5.4.4.6 Thin sheet material N/A
5.4.4.6.1 General requirements N/A
5.4.4.6.2 Separable thin sheet material N/A
Number of layers (pcs) ....................................... : N/A
5.4.4.6.3 Non-separable thin sheet material N/A
5.4.4.6.4 Standard test procedure for non-separable thin
sheet material .................................................... :
N/A
5.4.4.6.5 Mandrel test N/A
5.4.4.7 Solid insulation in wound components N/A
5.4.4.9 Solid insulation at frequencies >30 kHz ............ : N/A
5.4.5 Antenna terminal insulation No such terminal N/A
5.4.5.1 General N/A
5.4.5.2 Voltage surge test N/A
Insulation resistance (M) ................................. :
