STEP 4
STEP 5
(WIRED INSTALLATION ONLY)
14
Press the mounting bracket against the wall ensuring it is level with the
included level attachment and mark off screw holes. If wiring your
DoorBot, you'll want to make sure the doorbell wires are near
the center of the bracket.
JUMP TO STEP 6 TO CONTINUE
WITH WIRELESS INSTALLATION
Create a small slit in the center of the provided sealing tape. Then
gently pull the pre-existing wiring out from your wall and through
the slit in the sealing tape.
1 2 3
To Next Page
Loading...