Need help?Do you have a question about the DOORWORKS GDC12 and is the answer not in the manual?
Emphasizes reading instructions carefully and understanding warning/caution meanings to prevent injury or death.
Details precautions regarding grounding plugs and electrical shock risks.
Stresses proper door balance, spring tension, and safe installation practices like labels and release cords.
Covers compliance with codes, photo eye installation, and safe push button placement.
Provides guidelines for safe operation, periodic testing, and maintenance to prevent accidents.
Instructions for testing the door's balance, checking for sticking, and identifying spring issues.
Instructions for positioning and securing photo eyes on garage door sides.
Steps to wire photo eyes to the opener terminals and set the selector.
Procedure to set the fully open position for the garage door opener.
Procedure to set the fully closed position for the garage door opener.
Steps to automatically adjust forces for opening and closing the door.
How to test the door's automatic reversal using a 5cm object.
Procedure to test the photo eye's ability to stop/reverse the door when the beam is broken.
General| Motor Type | DC |
|---|---|
| Drive Type | Chain Drive |
| Remote Controls Included | 2 |
| Keyless Entry | Yes |
| Battery Backup | No |
| Operating Voltage | 120V AC |
| Horsepower | 1/2 HP |
| Maximum Door Height | 7 feet |
To Next Page
