15
1. To program transmitter, press “SET” button, “OK” LED glows with a beep. The unit is ready to
accept a transmitter within a 30 seconds time frame.
2. Press desired button on the transmitter within 30 seconds.
3. The operator beeps twice, acknowledging the transmitter is set.
x2
To ERASE ALL transmitters :
Press and hold “RADIO SET” button for about 5 seconds until “OK” LED flashes and beeps 3 times.
Programming the Remote Controls
DOWN
FORCE
LIMIT
UP
DOWN
UP
OK
RADIO SET
PB
To Next Page
Loading...
