Doosan 9/270 - Page 20

OPERATING INSTRUCTIONS 17
9/270, 9/300, 12/235, 17/235, 21/215, 9/270HA, 9/300HA, 10/300HA, 12/235HA, 17/235HA, 21/215HA
Wedge Diagnostic Display Codes
If the fault indicator lamp is illuminated, refer to the Alert/Shutdown list below.
If the fault indicator lamp is illuminated, refer to the Engine diagnostic list below.
ALERT/SHUTDOWN CONDITIONS
CONDITION
ALERT SHUTDOWN
CODE LIGHT BLINKS CODE LIGHT STEADY DELAY
(sec)
Engine Speed < Min. RPM 1 CPRSR
Malfunction.
30
Engine Speed > Max. RPM 2 CPRSR
Malfunction.
30
Engine Crank Time Exceeded 3 CPRSR
Malfunction.
0
High Engine Oil Temperature 5 CPRSR
Malfunction.
High Intake Manifold
Temperature
6 CPRSR
Malfunction.
Water In Fuel 8 CPRSR
Malfunction.
Engine Not Responding To
Throttle command
10 CPRSR
Malfunction.
Too Many Start Attempts
During Autostart
11 CPRSR
Malfunction.
0
Engine Shut Itself Down:
reason unknown
29 CPRSR
Malfunction.
0
Low AE Oil Pressure 31 CPRSR
Malfunction.
20
Disch. Temp (RT2)
Sensor Fault
32 CPRSR
Malfunction.
10
Sep. Tank Pressure (PT1)
Sensor Fault
33 CPRSR
Malfunction.
Seperator Tank Pressure >20
PSI During Start Attempt
(Engine Will Not Crank)
34 CPRSR
Malfunction.
0
Machine Over Pressure 35 CPRSR
Malfunction.
1