Need help?Do you have a question about the Doosan B25S-5 and is the answer not in the manual?
General| Model | B25S-5 |
|---|---|
| Category | Lifting Systems |
| Rated Capacity | 2500 kg |
| Load Center | 500 mm |
| Mast Type | Duplex |
| Overall Width | 1170 mm |
| Battery Voltage | 48 V |
| Lowering Speed (Unloaded/Loaded) | 500/500 mm/s |
| Lift Height | 3000 mm |
| Free Lift Height | 150 mm |
| Lift Speed (Unloaded/Loaded) | 0.50/0.46 m/s |
Overview of the Safety Section and its importance for safe operation.
Critical precautions and warnings to prevent accidents and ensure user safety.
Overview of safety rules, OSHA, and local regulations for lift truck operation.
Identifies and explains various warning signs and labels on the lift truck.
Emphasizes the necessity of proper training for operating and servicing the lift truck.
Comprehensive list of safety warnings and precautions for lift truck operation.
Details on hand placement, load backrest, standing, and overhead guard warnings.
Details on no riders, battery restraint, and parking brake warnings.
Information on common hazards and precautions during operation.
Precautions to prevent fires and explosions from flammable materials.
Identifies tipover warning decals and general method for preventing tipover injuries.
Explains the "Survive in tipover" warning and proper restraint system use.
Procedures for inspecting and maintaining the seat belt.
Step-by-step guide on how to properly fasten the seat belt.
Explains factors affecting lift truck stability and tipover prevention.
Defines CG and its importance for lift truck stability and load handling.
Defines the stability base area for preventing tipover.
Explains how capacity and load center affect stability and safe operation.
Essential rules for safe operation, including training and awareness.
Rules for handling loads, avoiding overload, and driving on different surfaces.
Guidelines for operating safely, including load handling and ramp usage.
Specific actions to take during a tipover using the restraint system.
Pre-operation checks and adjustments before starting the lift truck.
Steps involved in starting the lift truck safely.
Pre-operation checks including brakes, steering, and controls.
Guidelines for safe and efficient lift truck operation.
Procedures and safety precautions for towing a disabled lift truck.
How to use the accelerator pedal and directional control lever.
Operation of parking brake and service brake pedal.
How to operate the lift and tilt control levers for fork movement.
Detailed pre-operation inspection checklist for safety and maintenance.
Step-by-step guide for starting and operating the lift truck.
Techniques for inching into loads and lifting them safely.
Load capacity charts for different mast configurations.
Load capacity charts for integrated side shifter models.
Load capacity charts for hook-on side shifter models.
Guidelines for inspecting, maintaining, and repairing lift truck forks.
Steps for first installation and daily/preventive maintenance fork inspections.
How to read and interpret the battery discharge indicator.
Guidelines for cleaning, handling, and general care of batteries.
Proper procedures for charging, maintaining, and managing battery life.
Schedule for routine maintenance tasks based on service hours or time intervals.
Detailed checklist for daily walk-around inspection of the lift truck.
To Next Page
