Need help?Do you have a question about the Doosan DL300-3 and is the answer not in the manual?
General| Engine Make | Doosan |
|---|---|
| Net Power | 191 hp |
| Breakout Force | 35, 715 lbf |
| Operating Weight | 7, 275 lb (3, 300 kg) |
| Travel Speed | 7.5 mph (12 km/h) |
Provides critical safety information, warnings, and precautions for operating the machine safely.
Lists the specific machine models and serial number ranges covered by this safety section.
Explains safety messages and decals, including signal words like DANGER, WARNING, and CAUTION, to communicate hazards.
Covers operator responsibilities, safe operation practices, and knowing the machine's capabilities and limitations.
Details the procedures for removing the cylinder head from the engine.
Provides instructions on how to remove and install valve stem seals.
Details the process for removing and installing valve seat inserts.
Explains how to press out old valve guides and press in new ones.
Covers the removal and installation of XPI injector sleeves in the cylinder head.
Details the steps for removing and installing valve bridge guide pins.
To Next Page
