To Next PageTo Next Page
Need help?Do you have a question about the Doosan DL350-5 and is the answer not in the manual?
General| Brand | Doosan |
|---|---|
| Model | DL350-5 |
| Category | Front End Loaders |
| Language | English |
Defines the 'DANGER' signal word, indicating an imminently hazardous situation that could lead to serious injury or death.
Defines the 'WARNING' signal word, indicating a potentially hazardous situation that could result in serious injury or death.
Defines the 'CAUTION' signal word, indicating a potentially hazardous situation that could result in minor or moderate injury.
Defines the 'IMPORTANT' signal word, identifying procedures to prevent damage to the machine.
Details required PPE such as hard hats, safety shoes, glasses, gloves, and protective clothing for safe operation.
Provides guidelines to prevent serious injury or death when accessing or exiting the machine, emphasizing footwear and handrails.
Explains 'DANGER' signs related to seat belt use and lift arm hazards, emphasizing secured lifting and avoiding under-lifted arms.
Specifies the required fuel sulphur content (≤ 10 mg/kg) and the correct 32.5% urea solution (AdBlue®) for SCR.
Lists essential daily checks for engine oil, coolant, filters, work tools, tires, leaks, and system operations.
Outlines weekly maintenance tasks including greasing pins, checking belts, and draining fuel condensation.
Provides tyre pressure recommendations for various wheel loader models, sizes, and applications (Sand pit, Quarry, Road, Driving).
Identifies and describes the functions of key controls on the front console, including pedals, steering wheel, levers, and dashboard.
Details joystick controls for multidirectional movement, horn, FNR selection, and 3rd hydraulic auxiliary functions.
Describes how to activate electric steering via joystick and adjust the control unit position.
Explains how to use the joystick's FNR control and the two available driving modes (Fast and Soft).
Explains setting two exact positions (high/low) for the lift arm and activating float position.
Describes how to engage auto return to dig and adjust the sensor position for attack angle.
Details the Intelligent Clutch Cut Off (ICCO) function, its benefits for hydraulics, and activation indicators.
Explains how the brake pedal functions for inching (hydraulic cut-off) and real braking, including fuel saving.
Describes the hydro-pneumatic accumulator cushioning and how to activate the L.I.S. system.
Provides step-by-step instructions to configure the activation speed for the L.I.S. system via the on-board computer.
Explains the torque convertor lock-up function, its activation, and benefits for travel speed and fuel consumption.
Details the Hydraulic Differential Lock (H.D.L.), its foot switch and automatic activation via dashboard switch.
Describes how to set the maximum speed limit up or down for different gear ranges.
Details the cold start procedure required below -2°C, including parking brake and machine movement.
Explains operating the machine in Limited Drive Mode between -2°C and 10°C, with first gear and neutral requirements.
Details Manual Mode, Auto 1-5 Mode, and Auto 2-5 Mode for gear shifting and acceleration.
Details manual and automatic test procedures for the emergency steering system and indicator light function.
Lists available settings for reversing fan, L.I.S. activation, auto shut-down, auto idle, and emergency codes.
