Need help?Do you have a question about the Doosan GC20SC-5 and is the answer not in the manual?
General| Model | GC20SC-5 |
|---|---|
| Category | Forklifts |
| Fuel Type | Diesel |
| Tire Type | Pneumatic |
| Transmission Type | Automatic |
| Load Center | 24 inches |
| Engine Power | 36.2 kW |
Basic safety rules and recognition of potential hazards.
Identification and importance of various safety signs on the lift truck.
Key warnings and precautions for operators during lift truck use.
Understanding stability, center of gravity, and factors affecting tipover risk.
Essential steps for operator safety in the event of a tipover.
Detailed explanation of directional levers, pedals, and lift/tilt controls.
Essential walk-around inspection and pre-start checks.
Procedures for starting gasoline, LP-Gas, and diesel engines.
Common problems and corrective actions for LP-Gas engine issues.
Step-by-step guide for operating the lift truck, including transmission.
Correct procedure for safely parking the lift truck.
Guidelines for inspecting, maintaining, and repairing lift truck forks.
Scheduled maintenance tasks based on service hours or time intervals.
Routine inspections and checks to be performed every 10 service hours or daily.
Scheduled maintenance tasks including belts, cylinders, and controls.
Maintenance tasks for filters, chains, and hoses every 1000 hours.
Scheduled maintenance for drive axle, ignition system, and fuel filters.
Tasks including cooling system cleaning and steer wheel bearing repack.
Maintenance for battery system and oxygen sensors.
To Next Page
