OPERATION Operating & Maintenance Manual
31
DISCONNECT
• Engage tow vehicle parking brake.
• Chock tires of compressor.
• Set the vehicle parking brake. Chock
wheels of unit.
• Standing to the side, remove pin from
tube of jack.
• Disconnect safety chains. Crank jack
to raise eye or coupler from hitch.
Tow vehicle can be moved.
UTILITY PACKAGE SET-UP (no running
gear)
This unit must be located on vehicle bed to
allow access for normal servicing and
maintenance.
The air going into the inlet must be relatively
free of oil, dirt, soot and other debris. It must
be no more than 10 degrees F. (5 degrees C)
over the ambient temperature.
To Next Page