Dorel DA6580 - Frame and Rail Assembly

Insert wood dowel (7) into each end of the desk front rail (K).
Attach desk front rail (K) to headboard center crosses (F and G) with wood joint connectors (2)
and Allen key (8) as shown.
LOFT BED WITH DESK
DA6580
STEP 3
Insert wood dowel (7) into each end of the long guardrails (M), desk back rail (U) and bottom
back guardrail (V).
Attach long guardrails (M), desk back rail (U) and bottom back guardrail (V) to back posts (B and
C) with wood joint connectors (3) and Allen key (8) as shown.
Do not fully tighten bolts in this step, this will facilitate assembly in the following steps.
8
3
7
Holes on this side