Dorel GM 2010 - Care and Maintenance; CARE AND MAINTENANCE

28
CARE AND MAINTENANCE
NOTE: Remove harness as described on page 24.
Headrest cover: Adjust the booster seat headrest to its
highest position. Separate velcro at the back of the headrest
and remove cover.
Main body cover: Separate velcro at the back of the seat.
Pull off the elastics around the armrest and remove cover off
the seat.
• The seat covers can be machine washed in lukewarm
water on the ‘Delicate’ cycle.
• Tumble dry for 10 - 15 minutes on low heat.
• DO NOT BLEACH
• DO NOT DRY CLEAN
• DO NOT IRON
GENERAL INSTRUCTIONS
Elastic Strap
Style and design may vary
for the trim.