EasyManua.ls Logo

Dorel GM 2010 - Anchorage Fitting Installation; ANCHORAGE FITTING INSTALLATION

Dorel GM 2010
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
ANCHORAGE FITTING INSTALLATION
Read and follow all of the installation instructions for maximum
protection. If you have any questions regarding the installation or
use of this restraint, please contact Dorel Australia or agent, or a
child restraint tting station authorised by the relevant transport
authority, or in New Zealand, to consult the agent for the vehicle.
Do not modify or alter this restraint in any way. Use only Dorel
Australia recommended parts and accessories.
Protect all webbing from possible damage by sharp edges and
corners.
Check your vehicle owner’s handbook for the location of correct
anchorage points and possible need for spacers. If a suitable
anchorage point cannot be found, contact a child restraint tting
station for recommendations about your vehicle.
Some vehicles may have anchor points which are recessed below
the vehicle trim, spacers are supplied to raise the anchor point if
required.
An extension strap may be needed for vehicles without a xed
parcel shelf. Extension straps and extra ttings are available from
various stores.
Note : Extension straps 300mm ref no. 014398, 600mm ref no.
014399 and an anchor bolt kit, ref no. 014400.
Seat belt extenders should not be used if the seat belt is not long
enough to secure the child.
WARNING

Related product manuals