DOREMIDI MCV-10 - Page 8

10
Coarse Tune/
Transpose
SysEx
F0 00 21 5E 17 xx yy F7
xx: The CV port number.
yy: CV voltage coarse
adjustment/transposition,
adjust the Note
corresponding to CV
voltage.
1~12: move down 1~12
semitones.
13~24: move up 1~12
semitones.
yy = 0
11
Fine Tune
SysEx
F0 00 21 5E 18 xx yy F7
xx: The CV port number.
yy: CV voltage fine
adjustment, adjust the
semitone corresponding to
CV voltage.
1~50: drop 0~1 semitone.
51~100: rise 0~1 semitone.
yy = 0
12
AUX Type
SysEx
F0 00 21 5E 20 xx yy F7
xx: The AUX port number.
yy: The type of MIDI data
that controls AUX.
0: Volume, output 0~5V
according to the total MIDI
volume.
1: Pitch Bend, according to
the pitch bend value, the
output voltage is 0~5V.
2: After Touch, according to
the amount of after touch,
output 0~5V
3: MIDI CC, according to
the MIDI controller, output
0~5V.
4: Trig Pulse, when a new
Note is generated, a fixed
pulse is triggered.
5: MIDI Clock, output MIDI
clock.
yy = 0
13
MIDI CC
Number
SysEx
F0 00 21 5E 21 xx yy F7
xx: The AUX port number.
yy: Set the MIDI CC
controller number. It is valid
when AUX Type is MIDI
CC.
0~127: 0~127 CC
controllers.
yy = 0