DOREMIDI MCV-10 - SysEx Configuration Parameters

 MCV-10 configuration parameter table
Note: Configure parameters through xx, yy, each parameter is hexadecimal (HEX Code).
For MCV-10, Gate/CV/AUX numbers are all 0.
NO.
Name
MIDI Type
HEX Code
Description
Defaults
1
MIDI Channel
SysEx
F0 00 21 5E 00 00 yy F7
yy: MIDI channel.
0~15: MIDI channel 1~16.
16: Responding to all 16
channels.
yy = 16
2
Gate Type
SysEx
F0 00 21 5E 01 xx yy F7
xx: The Gate port number.
yy: The Gate type:
0: 0/5V, 1: 0/15V, 2:
S-Trigger.
yy = 0
3
Re-Trigger
Time
SysEx
F0 00 21 5E 02 xx yy F7
xx: The Gate port number.
yy: Re-trigger interval time:
0~50: 0~5ms, each unit is
0.1ms.
yy = 0
4
Gate Delay
SysEx
F0 00 21 5E 03 xx yy F7
xx: The Gate port number.
yy: Delay time:
0~10, 0~1ms, each unit is
0.1ms.
yy = 0
5
Gate Toggle
SysEx
F0 00 21 5E 04 xx yy F7
xx: The Gate port number.
yy: Indicates whether the
Gate switch state is toggled.
0: not toggled, 1: toggled
yy = 0
6
CV Type
SysEx
F0 00 21 5E 10 xx yy F7
xx: The CV port number.
yy: The CV type.
0: V/Oct, 1: Hz/V, 2:
1.2V/Oct.
yy = 0
7
Note Priority
SysEx
F0 00 21 5E 11 xx yy F7
xx: The CV port number.
yy: When multiple Notes are
generated, the priority of
conversion.
0: New Note, 1: High Note,
2: Low Note.
yy = 0
8
Reference
Note
SysEx
F0 00 21 5E 12 xx yy F7
xx: The CV port number.
yy: Note corresponding to
CV = 0V.
0~127: indicating 0~127
Notes.
yy = 21
9
Pitch Bend
Range
SysEx
F0 00 21 5E 13 xx yy F7
xx: The CV port number.
yy: pitch bend range.
1~12: 1~12 semitones.
yy = 2