English
USB storage is enabled by default and allows a computer or device con-
nected using a USB-cable to access files on this phone. You can change that
with the following settings.
1. Press
Menu Settings Connected devices USB.
2. Set the wanted setting:
• Charge this device to only allow charging.
• Transfer files to allow access to the file system of the phone. Ap-
ple’s Mac OS X doesn’t include MTP support. Visit Android File
Transfer to download a file transfer application for Mac OS X.
• Transfer photos (PTP) to appears to the computer as a digital
camera. In this mode, your phone will work with digital camera
applications that support PTP but not MTP. Apple’s Mac OS X
does support PTP, so you can use PTP mode to transfer photos to
a Mac over a USB connection without any special software.
• Use device as MIDI to connect the phone as a MIDI device (Musi-
cal Instrument Digital Interface is a technical standard that de-
scribes a communications protocol, digital interface, and
electrical connectors that connect a wide variety of electronic
musical instruments, computers, and related audio devices for
playing, editing and recording music).
3. Press
to confirm.
Battery
See your phone’s battery status and activate power saving mode.
Standby intelligent power saving
Standby intelligent power saving helps to increase battery life by intelli-
gently slow down processes to a minimum in idle mode.
1. Press
Menu Settings Battery.
2. Set the switch Standby intelligent power saving to on
to enable.
Note! This feature is by default turned on.
Battery saver
Once activated, the power saving mode, helps to increase battery life. The
battery saver reduces your device’s performance and limits vibration, loca-
tion services, and most background data. Email, messaging, and other apps
that rely on syncing may not update unless you open them. Battery saver
57
To Next Page
Loading...
