Doro 7031 - Network & Internet - Wi-Fi Calling and APNs; Wi-Fi Calling and Access Point Names (APN)

English
Wi-Fi calling
For improved voice communications over Wi-Fi.
1. Press Menu Settings Network & Internet Mobile net-
work select SIM card (if applicable) Wi-Fi calling.
2. Set the switch to on to activate it or to deactivate.
Note! Your network operator also needs to support this feature.
Access Point Names
An Access Point Name (APN) is the name of a gateway between a mobile
network and another computer network, mostly the public Internet. The
APN settings are used by services that communicates using other computer
networks. The APN settings for most major service providers are already in-
cluded from start. There are different APN settings for different services
like message, data and AGPS.
Follow the steps below if your service provider’s profile is not in the list or
if you need to change any setting. Contact your service provider for correct
settings.
1. Press Menu Settings Network & Internet Mobile net-
work select SIM card (if applicable) Access Point Names.
2. To change and existing APN profile, select a profile and press .
If your service provider’s profile is not in the list, press New
APN to enter settings for your service provider:
• Name to enter a name for the APN.
• APN to enter the APN address.
• Proxy to enter HTTP proxy address.
• Port to enter HTTP proxy port.
• Username to enter user name.
• Password to enter password.
• Server to enter the server.
• MMSC to enter the MMSC.
• MMS proxy to enter MMS proxy address.
• MMS port to enter MMS proxy port.
• MCC to enter the operator MCC code.
• MNC to enter the operator MNC code.
48