English
Billing cycle
Set the data notification limits and time periods.
1. Press Menu Settings Network & Internet Data usage
select SIM card (if applicable) Billing cycle.
2. Set the Set data warning switch to on to get a warning when
you reached the mobile data usage limit of Data warning.
3. Set the Set data limit switch to on to turn off mobile data when
limit of Data limit is reached.
4. Press Clear data usage to reset the mobile data usage counter and
press Ok to confirm.
Wi-Fi data usage
See the data counters for Wi-Fi data traffic.
Press Menu Settings Network & Internet Data usage
Wi-Fi data usage.
Hotspot & tethering
IMPORTANT!
Using mobile data services can be costly. We recommend that you check
your data rates with your service provider.
Allow other devices to share your phone’s Internet connection by connect-
ing via USB, Bluetooth or Wi-Fi. Internet sharing only works if you phone is
connected to the Internet over the mobile data network and it will disable
any existing Wi-Fi connection on the phone while active.
USB Tethering
Share your phone’s Internet connection by connecting via USB cable. You
must first connect the computer to the phone.
1. Press Menu Settings Network & Internet Hotspot &
tethering.
2. Set the USB Tethering switch to on to enable Internet sharing
via the USB cable.
Note! The first time it might take some time before the connection is
established.
51
To Next Page
Loading...
