English
• Security to set the security type (always use WPA2 PSK if the
connecting device supports it).
• Password: a password is used to prevent unauthorized access to
your mobile network. This option is available only when the se-
curity type is WPA2(AES).
Note! Check Show password to see it in clear text.
• Press Save to confirm any changes.
5. Press WPS connect to connect to your phone using WPS:
• Push button: First select this mode and the try to connect with
the other device using WPS.
• PIN from client: Enter the given PIN code on the other device us-
ing WPS. The setup can take up to two minutes to complete.
Press Connect to initiate WPS connection.
6. Below you can see connected and blocked devices.
Dual SIM settings
If you have more than one SIM card installed, you will be asked what SIM
card to use. Here you can set the preferred SIM card for different types of
mobile traffic.
1. Press Menu Settings Network & Internet Dual SIM
settings.
2. Set the switch to on for each SIM card slot you want enabled.
3. Select the preferred SIM card for the different types of mobile traffic.
• Mobile data
• Calls
• Messaging
Reset Wi-Fi, mobile & Bluetooth
Here you can reset all network settings, including Wi-Fi, mobile data and
Bluetooth settings.
1. Press Menu Settings Network & Internet Reset Wi-Fi,
mobile & Bluetooth.
2. Select SIM card if applicable and press Reset settings.
3. Press Reset settings to confirm the reset.
53
To Next Page
Loading...
