Doro HEARPLUS 313CI - Page 10

10
English
-2- CONTRAST
Use
v
/
V
to set the display contrast setting
(1–4), and confirm with .
KEYT. ON
Use
v
/
V
to set key tone ON/OFF, and confirm
with .
-100- FLASH
Use
v
/
V
to set the flash key time
(100/300/600 ms) and confirm withand confirm with .
The standard setting is 100 for most countries,
300 for France/Portugal, 600 for New Zealand.
LED OFF
Use
v
/
V
to enable/disable the LED indicator for
new calls, and confirm with .
TONE
Use
v
/
V
to select either tone or pulse dialing
mode, and confirm with .
Note!
If unsure of which mode to use, select TONE,
this works in most locations.