12
English
Position the telephone so that the screws on the
wall fit into the slots in the bracket. Then slide
the telephone downwards until it is hanging on
the screws.
Remove the handset hook (C) by pushing it
upwards, and insert it in the reversed position so
that the small tab (D) protrudes. The hook will
now keep the handset in the cradle when the
phone is mounted on the wall.
Reconnect the handset and place it in the
cradle.
Note!
If the phone is to be used as a desktop phone
again, remember to reverse the position of the
handset hook.
5.
6.
7.
To Next Page
