Primo 215 by Doro
Quick Start Guide
Activating the phone
Hold the red button on the telephone for approx. 4
seconds to turn it on/off.
If the SIM card is valid but protected with a PIN code (Perso-
nal Identification Number), Input PIN is displayed.
Enter the PIN code and press OK ( upper left corner
of keypad). Delete with Clear ( upper right corner of
keypad).
Setting the language
The default language for the phone menus, messages etc.
is determined by the SIM card. You can change this to any
other language supported by the phone.
1. Press Menu, scroll to Settings and press OK.
2. Select Phone and press OK.
3. Select Language and press OK.
4. Select a language from the list and press OK.
Setting time and date
1. Press Menu, scroll to Settings and press OK.
2. Select Phone and press OK.
3. Select Time and date and press OK.
4. Select Set home city and press OK.
5. Select a city from the list and press OK.
6. Select Set time/date and press OK.
7. Enter the time (HH:MM) and press .
8. Enter the date (DD/MM/YYYY) and press .
9. Using * and #, select whether Daylight saving
should be turned on or off and press Save.
Making a call
1. Enter the phone number including the area code.
Delete with Clear.
2. Press to dial. Press Abort to cancel dialling.
3. Press to end the call.
Receiving a call
1. Press or Answer to accept the call or press
Reject to reject the call (busy signal).
You can also press to reject the call directly.
2. Press to end the call.
Emergency button
IMPORTANT!
Always inform recipients in number list that they are listed
as your emergency contacts.
CAUTION
When an emergency call is activated the phone is
pre-set to handsfree mode. Do not hold the device
near your ear when the handsfree mode is in use,
because the volume may be extremely loud.
Display status symbols
Signal strength
Battery level
New entry in the call list (Missed call)
Keypad locked
Alarm active
Bluetooth on
Headset connected
USB connection
Ringer on
Ringer off
Vibration only
Ringtone and vibration
First vibration, then ringtone
Unread SMS
Declaration of Conformity
We declare that Primo 215 by Doro conforms to the
essential requirements and other relevant regulations con-
tained in the Directives 1999/5/EC (R&TTE).
The CE symbol confirms the conformity of the tele-
phone with the above directive.
You can download the complete user guide as well as the
declaration of conformity from our website
http://www.ivsgmbh.de/de/support/
downloadsauswahl/
In case you need support during setup or usage of your
mobile phone you will find the relevant contact details on
the following website:
http://www.primobydoro.com/support
Internet:
www.ivsgmbh.de
IVS GmbH
Im Frauental 14 • 92224 Amberg
© IVS GmbH 2014 • All rights reserved
IVSQSGEN_Primo 215 by Doro - V 1.0
Using the emergency call button, you can easily call pre-
set numbers.
The emergency call function must be activated in the
"SOS Setting" menu if you want to use it. In the complete
user guide (available on our website), you can find infor-
mation on how to activate this function and enter the con-
tacts in the number list and edit the emergency call SMS.
• Press the emergency call button on the back of the tele-
phone 3 times quickly. A loud signal will sound. The
seconds are counted down on the display (delay time).
During this time, you can prevent potential false alarms
by pressing or Abort.
• The telephone then sends an SMS text message to all
telephone numbers in the emergency call list if the emer-
gency SMS is activated in the SOS settings.
• The telephone then dials the first telephone number in
the list. If the call is not accepted within 25 seconds, the
next number is dialed. The emergency call sequence is
repeated three times or until the call is accepted or until
is pressed.
IMPORTANT
• After sending the emergency call SMS, the numbers in
the number list are called sequentially.
Primo 215 Quick Start Guide (EN) 140314_Endformat_85x105mm_XP9_Layout 1 21.03.14 09:41 Seite 1