Dorr DAF 42 - LC Display; Flash Range Indicator; Specifications

LC Display
The following information can be read o the LC display:
• automatic or manual zoom mode (24/28/35/50/70 or 85 mm)
• lens stop setting
• exposure OK indicator
• ash range indication in m and ft
• TTL indication
• power level indication M in manual mode (full capacity, 1/2, 1/4, 1/8 and 1/16)
• lm speed setting ISO/ASA
• beeper signal on
To read o this information from the LC display in weak ambient light, just slightly press the LIGHT button.
This will illuminate the LC display for approx. 5 seconds.
Flash Range Indicator
The DAF-42 is equipped with a micro controller that automatically calculates the ash range, indicated as a
bear beneath the meter scale. The following factors inuence the ash range:
• focal length setting
• lm speed used (ISO number)
• aperture setting
Above factors have already been considered when indicating the ash range on the display and when
ashing in TTL mode.
Specications:
Overview Guide No./Focal Length
Capacity/Zoom Full 1/1 1/2 1/4 1/8 1/16
85 mm 42 29 22 15 11
70 mm 40 27 21 14 10,5
50 mm 38 26 19 13 10
35 mm 32 23 17 12 9
28 mm 28 20 15 11 8
24 mm 25 18 14 10 7
18