Page 11
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
D14MZ2 Troubleshooting - Part 2
Step 6: Now insert the piston into the body. It should
be a snug t. If either is loose the anges need to be
replaced.
Step 5: To test the lower ange remove the plunger by
turning it a quarter turn counter clockwise and pulling it
straight out.
Step 4: Another way to check the anges is by doing a
t test. To test the upper ange invert the piston and
insert it into the blue bell housing. It should t snuggly.
To Next Page
Loading...
