Page 2
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 4: If you don’t feel suction on your nger turn the
water off and release pressure by pressing the air bleed
button and remove the Dosatron.
Step 5: Unscrew the injection stem nut and pull the stem
straight out from the body. Set the nut and stem aside.
Step 6: Unscrew and remove the bell housing.
D14MZ2 Troubleshooting - Part 1
To Next Page
Loading...
