Page 8
D14MZ2 Troubleshooting - Part 1
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 24: One last thing, take a look at the top of the
suction hose. If it ares out cut an inch or so off and
reinstall. Or, if the suction hose is cracked, ridged, or
looks really old just replace it.
Step 23: Reinstall the nut hand tight.
Step 22: Align the notches in the lower part of the body
with the teeth on the top of the injection stem assembly.
To Next Page
Loading...
