1312
Index
1. Introduction 13
2. Kindly note 13
3. Delivery contents 13
4. Usage 13
5. How to use device
5.1 Device description 14
5.2 Start-up device 15
5.3 Factory presets 15
5.4 Functions 15
5.4.1 Measuring unit switching 15
5.4.2 Calibration 15
5.4.3 Display HOLD MAX MIN AVE 16
5.4.4 19-Measurements memory 16
5.4.5 AUTO-OFF-function 16
5.4.6 Measuring channel 2 off/on switch 17
5.4.7Displaydifferencetemperature(T1-T2) 17
5.4.8 Display Ohm/Millivolt 17
5.5 USB-Connection 17
5.6 Battery replacement / Battery status indication 18
6. Technical data 18
7. Explanationofsymbol 19
8. Wastedisposal 19
9 Storage and cleaning 19
1. Introduction
Dear Sir or Madam,
Thank you very much for purchasing one of our products. Before
operating the data logger please read this manual carefully.
You will get useful information for understanding all functions.
2. Kindly note
• Checkifthecontentsofthepackageareundamagedand
complete.
• Removetheprotectionfoilabovethedisplay.
• Forcleaningtheinstrumentpleasedonotuseanabrasive
cleaner only a dry or moist piece of soft cloth. Do not allow any
liquid into the interior of the device.
• Pleasestorethemeasuringinstrumentinadryandcleanplace.
• Avoidanyforcelikeshocksorpressuretotheinstrument.
• Noresponsibilityistakenforirregularorincompletemeasuring
values and their results, the liability for subsequent damages is
excluded!
3. Delivery contents
• Measuringinstrument
• Operatinginstruction
• Calibrationreport
• Battery2xAAsize1,5Volt(alreadyinserted)
4. Usage
The instruments of P4000 series are suitable for temperature
measurementswithanexternalsensor.Areasofapplicationdepends
ontheprobe(theprobeisnotincludedwiththeinstrument):
• Air(gasiformmedia)
• Waterorsimilarmedia(liquids)
• Semisolidmedia(withpenetrationprobe)
• Surface