Need help?Do you have a question about the Dosy TFC-3001 and is the answer not in the manual?
General| Frequency Range | 1.8-525MHz |
|---|---|
| Power Range | 0-200W |
| Accuracy | ±5% |
| Impedance | 50 Ohms |
| Display | LCD |
| Input Impedance | 50 Ohms |
Guidance on how to install the test center into your transmitter line, including initial setup steps.
Initial recommendations for setting SWR and MOD RF level controls and range switches for safe operation.
Detailed procedures for operating the test center, including measuring power, setting SWR, and checking modulation.
Instructions on how to measure power output in watts using the RF Power Range Switch.
Procedure for setting the SWR levels by adjusting the SWR RF Level Control to achieve a full scale reading.
Steps for setting and checking AM modulation, emphasizing the use of the SET position and caution with high power.
To Next Page
