Troubleshooting Tips
Issues Reasons Solutions
Turn on the machine with
no response
Change power supply
Cables are plugged in
all the way
Power supply failure
Cables are connected
improperly
1. Disassemble the shooting head,
clean up inside of the head and balls
2. use the correct size balls
3. Ball supply machine errors
4. Bally supply gearbox errors
Balls not coming out
Balls falling out hole,
not shooting
1. Shooting machine errors
2. Check that all cables are plugged
in all the way
3. Check that power supply is
plugged in all the way
Shooting head not swing
1. Swing machine errors
2. Swing gearbox errors
3. Check that all cables are plugged
in all the way
4. Check that power supply is
plugged in all the way
A narrow range of swing
Reset the control screw
To Next Page
Loading...