DoubleSight DS-245W User Manual

Component Name & Introduction
FRONT
© < : Adjusts volume of sound, Move with in the OSD menu or adjust values(DOWN, LEFT)
® > : Adjusts volume of sound, Move with in the OSD menu or adjust values(UP, RIGHT)
(D POWER : Power ON/OFF
@ Power indicate : On Mode : Green / DPMS Mode : Red / OFF Mode : Black
© MENU : Indicates OSD menu / Select highlighted function.
© AUTO : Adjusts screen to be optimum automatically. / Cancels selected menu.
BASIC SETUP
► Automatic Image Adjustment.
You can adjust the image settings (such as image posi¬
tion, phase, etc.) manually or by using the LCD monitor’s
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the current
graphics mode. Press AUTO (© in fig. 4) to launch the
automatic adjustment. The process will take a short
while until completed.
► Shortcut for Adjusting Contrast and Brightness.
You can adjust contrast and brightness directly by pres¬
sing the < button (© in fig. 4) while the OSD menu is not
displayed. Press the > button (® in fig. 4) to increase
the contrast/brightness or the < button (0 in fig. 4) to
decrease it.
► Setting the Volume Directly.
You can adjust the volume directly by pressing button
> ((2) in fig. 4) when the OSD menu is not displayed on
screen. You can then change the volume by pressing
the buttons < or > (© and 0 in fig. 4).
► Locking and Unlocking the OSD.
To lock and unlock the OSD menu, hold down the button
combination < (0 in fig. 4) and MENU (© in fig. 4) until
a corresponding message is displayed.
► Disabling the Sound (MUTE).
You can mute sound playback by pressing the button
> (0 in fig. 4) while the OSD menu is not displayed
on screen. Next, press the button MENU (© in fig. 4)
to mute the sound or press the button MENU again to
reactivate it.
9

DoubleSight DS-245W Specifications

General

Brand	DoubleSight
Model	DS-245W
Category	Monitor
Language	English