DoubleSight DS-309W User Manual

Connecting to PC
X\X[
Connecting to PC
OSD Control
To connect the monitor to the PC, please follow these instructions:
1. Connect DVI cable to the PC. Tighten all the screws.
2. Connect DVI cable to the DVI connector on the back of the monitor. Tighten all the screws.
3. Connect one end of the power cord to the AC adaptor and the other end to the AC power outlet.
4. Connect DC adaptor cable to the power input connector on the back of the monitor.
5. Turn On the monitor and PC.
6. Adjusting display resolution of PC
This monitor does support OSD Menu control function.
- Resolution : 2,560 X 1,600
- Refresh Rate : 60 Hz
ྜྛྚྙ
ྙ : Input Source Select / OSD Sub Menu Select
ྚ
ྛ : Volume Up & Down / OSD Menu Left & Right
ྜ : OSD Menu Up & Down / Channel Up & Down
ྜྷ
G
G
G
ྜྷ
G
usting the onitor creen
How to adjust monitors
zlslj{GGGtlu|GGG}vsRGGG}vsTGGG|wGGGkv~u
ྜGkv~uGaGzGhGyOX]aXWG[aZP
ྜG|wGaGpG}nhGSGhGGGGG
ྛG}vsRSG}vsTGaGjGGG
unctions escri tion
OSD Menus
Image Setting.
- Adjust screen’s Brightness, Sharpness and Color Temperature.
Display Setting.
- Adjust Aspect ratio, PIP mode/position/source, Transparency.
Audio Setting.
- Adjust Mute, Volume and Output.
PC.
- Adjust Display position automatically or manually.
Setup.
- Adjust Language, OSD Menu time, OSD position and OSD transparency,
and Factory Reset.

DoubleSight DS-309W Specifications

General

Brand	DoubleSight
Model	DS-309W
Category	Monitor
Language	English