41
3 INSTALLATION
THROUGH-THE-WALL POWER UNIT INSTALLATION
If the remote power unit is to be mounted through-the-wall, the following list of material and
diagram is the suggested method.
Item # Quantity Description
1 2 Hydraulic Hose, Hi-Pressure (sized to power unit*), 36” long
2 2 Pipe, Schedule 80 (sized to power unit*), 36” long
3 2 Hydraulic Hose, Hi-Pressure (sized to power unit*), 48” long
4 2 Steel plate with holes for Item # 2, 3/16” x 8” x 12”
5 4 Coupling, Female (sized to fit hose & pipe*)
6 3 Coupling, Male x Female Swivel
List of Material
* 1/2” for hose lengths of 20’-0” or less. Consult factor for longer lengths.
CYLINDER
ITEM # 2
ITEM # 4
EACH SIDE
ITEM # 5
ITEM # 1
ITEM # 6
ITEM # 3
WALL
POWER
UNIT
TOP VIEW
COMPACTOR
To Next Page
Loading...