10106923-AA 3
English
EN
This manual comprises a text section and an
illustrated section. You will find the illustrated
section at the end of the text section.
Keep this information to hand so you can refer
back to it at a later date.
■Important note
Find all of your product’s documentation on our
website by scanning the QR code on the cover or
by visiting www.markem-imaje.com.
WARNING
Risk of puncture
When replacing the
cartridges, do not touch the
nozzle.
■Safety
only adults are normally present.
Before using this printer, please read and fully
comply with these instructions, the material safety
data sheet (MSDS) for consumables used, and
safety labels affixed to the printer.
Servicing must be performed only by
appropriately trained.
■ Liability
Markem-Imaje shall not be liable for any damage
or injury resulting from any failure to follow these
safety instructions, as well as good manufacturing
practices and safety standards that are generally
applicable in the industry, when installing, using or
Any user who modifies or repairs Markem-Imaje
accessories other than those supplied by Markem-
Imaje, or fails to comply with Markem-Imaje
specifications shall have sole responsibility for the
Markem-Imaje shall not be liable for any
malfunction or damage caused by any modification
purposes other than those for which it is designed.
The user shall be solely responsible for taking any
Markem-Imaje consumables (inks, cleaning
products and other consumables), spare parts and
accessories are designed for use with Markem-
Use of consumables, spare parts or accessories,
that are not produced or recommended by
Markem-Imaje for use with the specific Markem-
cause performance failures.
Markem-Imaje consumables and spare parts for
conformity with certain regulations and safety
standards, use of non-Markem-Imaje consumables
and spare parts also may be inconsistent with
testing conditions and affect compliance of the
bear all risks associated with use of unsuitable
consumables and spare parts.
■ Health / Hygiene /
Environment
For certain consumables:
consumables is strictly prohibited.
recommended during cleaning operation.
Max. noise level < 70 dbA
Operating temperature
+5°C to +40°C
(+41°F to +104°F)
Humidity
0 - 90% RH with no
condensation
The use of certain inks may limit the temperature
and humidity ranges (see the ink specification
sheet).
The printer must not be used in explosive
atmospheres.
■ Fire prevention
CAUTION: For continued protection against
possible fire, use only the ink/additive mixtures
specified by Markem-Imaje.
If your printer uses flammable ink or additive:
or cleaning products, or ink-soaked rags (even
dry) near the printer.
immediately adjacent to the printer (maximum 10
meters).
To Next Page
Loading...
